When ever one tries to install a multiboot OSX Window box, you are most likely to run into the boot0:error, or a b0 error. what this means is that the partition that you intend to boot into did not have the active flag set. Most of these errors arise after you have installed 2 systems and it wouldn't boot into either or both. This can be easily fixed by the following steps
1. Boot with mac OSX boot disc
2. Goto Utilities and enter Terminal
3. in the terminal type
diskutil list
Make a note of which disk has the partitions(rdisk0, rdisk1, etc)
4. type
fdisk -e /dev/rdisk0
you might see the MBR error, don't worry about it.
5. type
p
and you should see all your partitions. At this point you would want to figure out which partitions you want to boot into first. If you have 2 partitions then flag the one you want to be primary last.
For example, you have 2 partitions, 1 and 2.Partition 2 holds windows 7 and 1 holds OSX Snow Leopard. You want to boot into OSX boot loader to choose which parition to boot, in this case you want to flag the windows partition active first, then flag the OSX partition active,
6. so you would type
f 2
write
y
f 1
write
y
exit
This would fix your problem, eject your CD and reboot.
Showing posts with label hackintosh. Show all posts
Showing posts with label hackintosh. Show all posts
Tuesday, March 30, 2010
Monday, December 21, 2009
Asus w7j OSX86 settings
Asus w7j OSX86 settings 10.5.7
These are the settings used to install IPC distro on my Asus w7J.
Snow leopard 10.6.2
Seems like in 10.6.2 there is a problem with the VoodooHDA.kext and NVInject.kext
These are the settings used to install IPC distro on my Asus w7J.
Video: NvDarwin 256MB (QE/CI enabled), dual monitor doesn't work out of the box, but I know some change will make it work, but in that instance QE/CI doesn't work.
Chipset: ICHX
Audio: ALC861
Ethernet:Realtek R1000
Fix: PS2/keyboard
PowerMgmt: all
Video Card:Nvidia Geforce Go 7400
Wifi (3945): works with new driver for Snowleopard only.
These few links might be useful read for further study (will update)
Basics of Kext and installation of it (drivers for Mac)
Dual boot Wifi (3945): works with new driver for Snowleopard only.
These few links might be useful read for further study (will update)
Basics of Kext and installation of it (drivers for Mac)
For the Asus W7J, the SnowOSX Universal v.3.6 works out of the box, the Wifi doesn't work because it is one of the Intel Chipset. Sound needs a little support, just draw the Voodoo from the ATools folder to the Kext Utility Icon. Graphics is still a problem. I found the following solutions, but I have yet to try them out.
Seems like in 10.6.2 there is a problem with the VoodooHDA.kext and NVInject.kext
Tuesday, December 15, 2009
64bit boot for Snow Leopard
How do you know if your Snow Leopard upgrade is booting in 64 bit? Try these commands
ioreg -l -p IODeviceTree | grep firmware-abi
This command will check if your EFI is 32 bit or 64 bit the EFI can make or break for your 64 bit hardware running in 32 bit. There is a list of not too old Macs not being able to run in 64 bits because they have a dated version of the EFI.
To check if you are running the 64 bit Kernel, Type
uname -v
in terminal and if your response contains the string x86_64 in the output that means you are in luck.
ioreg -l -p IODeviceTree | grep firmware-abi
This command will check if your EFI is 32 bit or 64 bit the EFI can make or break for your 64 bit hardware running in 32 bit. There is a list of not too old Macs not being able to run in 64 bits because they have a dated version of the EFI.
To check if you are running the 64 bit Kernel, Type
uname -v
in terminal and if your response contains the string x86_64 in the output that means you are in luck.
Monday, November 23, 2009
SnowOSX Universal v3.6 (10.6.2)

UPDATE: On the russian site, it cites support for AMD, ATOM 330, Pentium 4 (D), Celeron CPUs, this is great news.
Also support for Samsung R-560 (R-310, R-610... etc.)
I got this to work on my Asus W7J, installed on a 16GB USB thumb drive. Running 64 Bit EFI Kernel too.
The new version of the assembly for single-layer DVD, which is built on the basis of Retail Snow Leopard 10.6 Update 10.6.2 Safari 4.04. An assembly can be installed on GUID, and at the Mbr. In the assembly immediately included Russian localization.
Extras. information: from the assembly removed all packages with drivers for printers, AdditionalSpeechVoices, other languages
The contents of the folder Customise
- PC EFI 9.4 - boot-9-4 by Netkas
or choice
- PC EFI 10.5 - Chameleon 2 RC3 (r658) PC EFI 10.5 by Netkas
- NullCPUPM - blocker (disabler) for IntelCPUPowerManagement
- PlatformUUID - Error 35 fix
- FakeSMC
- IOATA Kernel Panic fix - 32/64-bit IOATAFamily.kext from Leo 10.5.8 (compiled by Slice)
- EvOreboot - Restart and Shutdown fix
- EvOSpeedStep - Power Management for Core i7
- EvOenabler - ATI video injector
- SMBIOSResolver - only for PC EFI 9.4!!!
- Legacy AHCI - 32/64-bit Legacy kext for Intel AHCI (SATA)
- Legacy ATA - 32/64-bit Legacy kext for Intel ATA (IDE)
- Legacy JMicron ATA - 32/64-bit Legacy kext for JMicron ATA (IDE)
- PS / 2 - kekst interface PS / 2
- Rosetta - support for legacy applications
- ATools - a folder with a set of office utilities and drivers
System requirements: PC with a processor Intel SSSE3 (not to be confused with SSE3!)
Year: 2009
Version: 3.6
Platform: PC
Language: English Russian
Tabletka: Not required
Size: 4.71 Gb
Checksum:
MD5: 5d76a853b7d76d99e48f0fa1762933fd
Read more
Currently not on the bay or the nova.
Download from these links below. Apparently the other sites included were either not available or it is a paying download service.
http://hotfile.com/dl/18438462/9060fd3/SnowOSX3.6.part01.rar.html
http://hotfile.com/dl/18438637/72892f3/SnowOSX3.6.part02.rar.html
http://hotfile.com/dl/18438908/230262f/SnowOSX3.6.part03.rar.html
http://hotfile.com/dl/18439140/81b3032/SnowOSX3.6.part04.rar.html
http://hotfile.com/dl/18439356/b585762/SnowOSX3.6.part05.rar.html
http://hotfile.com/dl/18438428/a5a1c8e/SnowOSX3.6.part06.rar.html
http://hotfile.com/dl/18438588/3a02c05/SnowOSX3.6.part07.rar.html
http://hotfile.com/dl/18438860/2a2e7b1/SnowOSX3.6.part08.rar.html
http://hotfile.com/dl/18439183/a6f7460/SnowOSX3.6.part09.rar.html
http://hotfile.com/dl/18439408/2037804/SnowOSX3.6.part10.rar.html
http://hotfile.com/dl/18438383/2b0146a/SnowOSX3.6.part11.rar.html
http://hotfile.com/dl/18438657/b33517f/SnowOSX3.6.part12.rar.html
http://hotfile.com/dl/18438938/c0f3eea/SnowOSX3.6.part13.rar.html
http://hotfile.com/dl/18439150/98ef300/SnowOSX3.6.part14.rar.html
http://hotfile.com/dl/18439360/2cd8681/SnowOSX3.6.part15.rar.html
http://hotfile.com/dl/18438577/27d052b/SnowOSX3.6.part16.rar.html
http://hotfile.com/dl/18438844/8563e23/SnowOSX3.6.part17.rar.html
http://hotfile.com/dl/18439054/cd757f5/SnowOSX3.6.part18.rar.html
http://hotfile.com/dl/18439182/05d7168/SnowOSX3.6.part19.rar.html
Sunday, November 22, 2009
Dual Booting windows 7 and Mac OSX Hackintosh with bootthink
Bootthink is a relatively new bootloader created by a Chinese hacker. However it sometimes be easier to use than the traditional Chameleon. This is what you have to do. One very interesting aspect is that you can install this onto a USB Drive. By doing that you experiment with different settings before you install to your real system, thus not taking any chance of screwing your system.
1. Get yourself a copy of Ideneb, IPC or iATKOS and burn it to disc.
2. Boot that up in your computer and goto Disk Utilities
3. Make 2 partitions, first Mac Extended, and 2nd partition use a FAT
4. Install OSX into the Mac Extended partition. (I would assume you already know how to do that, for any problems go to insanelymac and search first, if you cannot find what you are looking for ask nicely, they are really helpful.)
5. After your mac is booted and running smoothly, pop in the Windows 7 install Disc and boot with it.
6. Make sure you do not re-partition your drive, format it with NTFS, and click continue.
7. You can find windows 7 loader from google.
8. Download Boot-think(2.3.18 is the newest version at the time of this article) and install the windows version with the .exe and reboot. Make sure you run as administrator.
9. Boot into Windows 7 and goto "Darwin" folder. Once you are in there, goto the "MBR" folder, run "setupMBR.bat" as administrator.
10. Enjoy
It should already work.
1. Get yourself a copy of Ideneb, IPC or iATKOS and burn it to disc.
2. Boot that up in your computer and goto Disk Utilities
3. Make 2 partitions, first Mac Extended, and 2nd partition use a FAT
4. Install OSX into the Mac Extended partition. (I would assume you already know how to do that, for any problems go to insanelymac and search first, if you cannot find what you are looking for ask nicely, they are really helpful.)
5. After your mac is booted and running smoothly, pop in the Windows 7 install Disc and boot with it.
6. Make sure you do not re-partition your drive, format it with NTFS, and click continue.
7. You can find windows 7 loader from google.
8. Download Boot-think(2.3.18 is the newest version at the time of this article) and install the windows version with the .exe and reboot. Make sure you run as administrator.
9. Boot into Windows 7 and goto "Darwin" folder. Once you are in there, goto the "MBR" folder, run "setupMBR.bat" as administrator.
10. Enjoy
It should already work.
Subscribe to:
Posts (Atom)